This is just a short FAQ to describe the wiring layout for the 52mm Greddy EGT gauge, since the directions come in Japanese only!

There are two separate harnesses:

A two wire harness with a red and white wire.  This is hooked up to the probe and should not be confusing.

And a 4 wire harness with red, black, orange, and white wires.

RED             = Constant power
BLACK        = Ground
ORANGE     = Ignition power
WHITE         = Lighting
 
 

I know this is a short FAQ, but there are other FAQ's on installing Gets, and you can visit Tom's VFAQs page